MotoLibrary MotoLibrary
← Harley-Davidson
Custom - Cruiser · 2025

Breakout

User Rating: /5 · No user ratings yet ✓ Your rating was saved
MotoLibrary Score
71 /100 Sporty
Power
104 HP
Torque
174 Nm
Engine
1923 ccm

2025 Harley-Davidson Breakout Technical Analysis & Specification Breakdown

Positioned in Harley-Davidson's custom - cruiser motorcycle lineup, the 2025 Harley-Davidson Breakout pairs a 1923 cc engine architecture with road-focused gearing. In factory specification, peak output is rated at 104 HP while maximum torque reaches 174 Nm, transferring power to the rear wheel through a 1 qt. (.95 l) gearbox and belt, 32/66 ratio final drive. With a specific output of 54.1 HP per liter, the engine character is prioritizing low-RPM tractability, mechanical longevity and relaxed throttle response over peak redline numbers.

On the scales, the Breakout measures 681 kg (1501 lbs) wet (curb), translating to a power-to-weight ratio of 0.15 HP/kg (6.55 kg per horsepower). Rider ergonomics and chassis geometry center around a 25 mm (1 in) seat height — giving shorter riders and urban commuters confident flat-foot reach at traffic stops, combined with a 66 mm (2.6 in) wheelbase engineered for quick, flickable steering geometry. The 5-liter (1.3 US gal) fuel tank supports practical everyday commuting and weekend road stints.

Within MotoLibrary's Harley-Davidson archive, this model family spans 3 indexed model years from 2021 to 2026, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.

Specific Output
54.1 HP/L
Power-to-Weight
0.15 HP/kg (6.55 kg/HP)
Standover Height
25 mm (1 in)
Engine
Displacement 1923 cc
Engine Details FXBR Breakout Notes
Power 104 HP
Torque 174 Nm
Compression 10.3:1
Valves/Cylinder Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; four valves per cylinder
Fuel System Electronic Sequential Port Fuel Injection (ESPFI) 3
Transmission
Gearbox 1 qt. (.95 l)
Final Drive Belt, 32/66 ratio
Clutch Mechanical, 10 plate wet, assist & conventional
Chassis
Frame Type Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; MIG welded; aluminum forged fender supports
Trail 5.7 in. (145 mm)
Front Suspension Dual-bending valve 49 mm telescopic with aluminum fork triple clamps; dual rate spring
Rear Suspension Hidden, free piston, coil-over monoshock; 43mm stroke; hydraulic preload adjustment
Wheelbase 66.7 in. (1,695 mm)
Ground Clearance 4.5 in. (115 mm)
Dimensions & Weight
Weight incl. 681 lb
Seat Height 25.6 in
Overall Height 44.3 in. (1,125 mm)
Overall Width 37 in. (940 mm)
Fuel Capacity 5 gal
Other
Starter 1.6 kW electric with solenoid shift starter motor engagement
More from Harley-Davidson
Buying Checklist

Before You Compare This Bike

Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.

Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
Rider Profile

Who Is This Bike For?

🔴
Advanced
High performance — experienced riders only.
✌️
Best For
Cruising & Touring
Estimate

Ownership Cost Calculator

⛽ Fuel
per year
🔧 Maintenance
per year
🛡️ Insurance
per year
TOTAL

* Estimates only. Actual costs vary by country, riding habits, insurance provider and maintenance schedule.

MotoLibrary
🏠 Home 🔍 All Bikes 📂 Categories ⚖️ Compare 🎛️ Advanced Filter 🎯 Bike Finder 🎬 Videos 📰 Blog 📖 Glossary ℹ️ About

🍪 We use cookies for analytics & ads. Cookie Policy