MotoLibrary MotoLibrary
← Harley-Davidson
Touring · 2026

CVO Road Glide ST

User Rating: /5 · No user ratings yet ✓ Your rating was saved
MotoLibrary Score
76 /100 High Performance
Power
127 HP
Torque
187 Nm
Engine
1977 ccm

2026 Harley-Davidson CVO Road Glide ST Technical Analysis & Specification Breakdown

Built around Harley-Davidson's touring motorcycle platform, the 2026 Harley-Davidson CVO Road Glide ST utilizes a 1977 cc engine layout. In factory specification, peak output is rated at 127 HP, transferring power to the rear wheel through a 1 qt. (.95 l ) gearbox and belt, 30/68 ratio final drive. With a specific output of 64.2 HP per liter, the engine character is indicating a tractable, stress-free state of tune focused on everyday usability and broad torque delivery.

On the scales, the CVO Road Glide ST measures 838 kg (1847 lbs) wet (curb), translating to a power-to-weight ratio of 0.15 HP/kg (6.6 kg per horsepower). Rider ergonomics and chassis geometry center around a 27 mm (1.1 in) seat height — giving shorter riders and urban commuters confident flat-foot reach at traffic stops, combined with a 64 mm (2.5 in) wheelbase engineered for quick, flickable steering geometry. The 6-liter (1.6 US gal) fuel tank supports practical everyday commuting and weekend road stints.

Within MotoLibrary's Harley-Davidson archive, this model family spans 3 indexed model years from 2024 to 2026, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.

Specific Output
64.2 HP/L
Power-to-Weight
0.15 HP/kg (6.6 kg/HP)
Standover Height
27 mm (1.1 in)
Engine
Displacement 1977 cc
Engine Details FLTRXSTSE CVO™ Road Glide® ST
Power 127 HP
Torque 138 ft-lb
Compression 11.4:1
Valves/Cylinder Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; four valves per cylinder
Fuel System Electronic Sequential Port Fuel Injection (ESPFI) 3
Transmission
Gearbox 1 qt. (.95 l )
Final Drive Belt, 30/68 ratio
Clutch Mechanically actuated 10 plate wet, Assist and Slip
Chassis
Frame Type Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin down-tubes; bolt-on rear frame with forged fender supports; MIG welded.
Trail 6.7 in. (170 mm)
Front Suspension 47 mm (1.9 in) Inverted 1×1 Front Forks with adjustable preload, compression damping and rebound damping
Rear Suspension Emulsion suspension with adjustable preload, compression damping and rebound damping
Wheelbase 64 in. (1,625 mm)
Ground Clearance 5.1 in. (130 mm)
Dimensions & Weight
Weight incl. 838 lb
Seat Height 27.5 in
Fuel Capacity 6 gal
Other
Starter 1.6 kW electric with solenoid shift starter motor engagement
More from Harley-Davidson
Buying Checklist

Before You Compare This Bike

Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.

Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
Rider Profile

Who Is This Bike For?

🔴
Advanced
High performance — experienced riders only.
🗺️
Best For
Long Distance Touring
Estimate

Ownership Cost Calculator

⛽ Fuel
per year
🔧 Maintenance
per year
🛡️ Insurance
per year
TOTAL

* Estimates only. Actual costs vary by country, riding habits, insurance provider and maintenance schedule.

MotoLibrary
🏠 Home 🔍 All Bikes 📂 Categories ⚖️ Compare 🎛️ Advanced Filter 🎯 Bike Finder 🎬 Videos 📰 Blog 📖 Glossary ℹ️ About

🍪 We use cookies for analytics & ads. Cookie Policy