The 2022 Benelli BN 125 is a naked bike motorcycle manufactured by Benelli, equipped with a 125.0 ccm (7.63 cubic inches) displacement unit (Single cylinder, four-stroke) with oil & air cooling. In factory trim, the engine delivers a rated power of 11.1 HP (8.1 kW)) @ 9500 RPM and peak torque of 10.0 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM, paired with a 5-speed transmission and chain (final drive) final drive.
For rider ergonomics and real-world handling, key chassis measurements include a curb weight of 142.0 kg (313.1 pounds), seat height of 770 mm (30.3 inches) If adjustable, lowest setting., fuel capacity of 13.50 litres (3.57 US gallons). Review the complete factory specification tables below to evaluate engine internals, suspension travel, braking hardware, tyre sizes and ownership estimates, or compare the 2022 Benelli BN 125 side by side against rival models in the Naked bike lineup.
Engine
Displacement125.0 ccm (7.63 cubic inches)
Engine TypeSingle cylinder, four-stroke
Power11.1 HP (8.1 kW)) @ 9500 RPM
Torque10.0 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM
Compression9.8:1
Bore x Stroke54.0 x 54.5 mm (2.1 x 2.1 inches)
Valves/Cylinder4
Fuel SystemInjection. Electronic fuel injection with throttle body d.28
Fuel ControlSingle Overhead Cams (SOHC)
IgnitionDelphi MT05
LubricationForced lubrication with wet sump
CoolingOil & air
Transmission
Gearbox5-speed
Final DriveChain (final drive)
ClutchWet
Performance
Fuel Consumption1.70 litres/100 km (58.8 km/l or 138.37 mpg)
Greenhouse Gases39.4 CO2 g/km. (CO2 - Carbon dioxide emission)
Emission DetailsEuro 4. Catalytic Converter and Oxygen Sensor.
Chassis
Frame TypeTrestle in steel tubes
Front SuspensionUpside - down forks,.35mm
Front Travel111 mm (4.4 inches)
Rear SuspensionSwing arm with central shock absorber with spring pre-load adjustment
Rear Travel40 mm (1.6 inches)
Wheelbase1360 mm (53.5 inches)
Ground Clearance190 mm (7.5 inches)
Wheels & Brakes
Front Tyre110/80-17
Rear Tyre130/70-17
Front BrakesSingle disc. CBS
Front Brake Ø260 mm (10.2 inches)
Rear BrakesSingle disc
Rear Brake Ø240 mm (9.4 inches)
WheelsAluminum alloy
Dimensions & Weight
Weight incl.142.0 kg (313.1 pounds)
Seat Height770 mm (30.3 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
