Engineered by Benelli for the minibike, sport motorcycle segment, the 2024 Benelli TNT 125 utilizes a 125 cc (7.6 cu in) oil & air-cooled single cylinder, four-stroke layout. In factory specification, peak output is rated at 11 HP (8 kW) at 9,500 rpm while maximum torque reaches 10 Nm (7.4 lb-ft) at 7,000 rpm, transferring power to the rear wheel through a 5-speed gearbox and chain final drive. With a specific output of 88 HP per liter and a 2,500 rpm working window between peak torque (7,000 rpm) and peak power (9,500 rpm), the engine character is indicating a tractable, stress-free state of tune focused on everyday usability and broad torque delivery.
Rider ergonomics and chassis geometry center around a 780 mm (30.7 in) seat height — offering a neutral standover height that accommodates most average-inseam riders without sacrificing cornering clearance, combined with a 1,215 mm (47.8 in) wheelbase engineered for quick, flickable steering geometry. The 7.2-liter (1.9 US gal) fuel tank supports practical everyday commuting and weekend road stints.
Within MotoLibrary's Benelli archive, this model family spans 2 indexed model years from 2020 to 2024, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.
Specific Output
88 HP/L
Power Band Window
7,000–9,500 rpm
Standover Height
780 mm (30.7 in)
Engine
Displacement125.0 ccm (7.63 cubic inches)
Engine TypeSingle cylinder, four-stroke
Power11.0 HP (8.0 kW)) @ 9500 RPM
Torque10.0 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM
Compression9.8:1
Bore x Stroke54.0 x 54.5 mm (2.1 x 2.1 inches)
Fuel SystemInjection. EFI
Fuel ControlSingle Overhead Cams (SOHC)
IgnitionTLI controlled by ECU
LubricationForced lubrication with wet sump
CoolingOil & air
Transmission
Gearbox5-speed
Final DriveChain (final drive)
ClutchWet clutch
Performance
Emission DetailsEuro 5
ExhaustCatalytic converter and O2 sensor
Chassis
Frame TypeSteel trellis
Front Suspension35mm Upside-down forks
Front Travel120 mm (4.7 inches)
Rear SuspensionRear swing arm with lateral shock absorber with spring pre-load adjustment
Wheelbase1215 mm (47.8 inches)
Ground Clearance160 mm (6.3 inches)
Wheels & Brakes
Front Tyre120/70-ZR12
Rear Tyre130/70-ZR12
Front BrakesSingle disc. 3 piston caliper CBS
Front Brake Ø210 mm (8.3 inches)
Rear BrakesSingle disc. CBS
Rear Brake Ø190 mm (7.5 inches)
WheelsAluminum alloy
Dimensions & Weight
Seat Height780 mm (30.7 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
