Built around Ducati's naked motorcycle platform, the 2010 Ducati Monster 796 utilizes a 803 cc (49 cu in) air-cooled v2, four-stroke layout. In factory specification, peak output is rated at 85.8 HP (62.6 kW) at 8,250 rpm while maximum torque reaches 58 Nm (42.8 lb-ft) at 6,250 rpm, transferring power to the rear wheel through a 6-speed gearbox and chain final drive. With a specific output of 106.8 HP per liter and a 2,000 rpm working window between peak torque (6,250 rpm) and peak power (8,250 rpm), the engine character is reflecting a performance-oriented street tune that balances strong mid-range pull with an energetic top-end rush.
On the scales, the Monster 796 measures 167 kg (368 lbs) dry, translating to a power-to-weight ratio of 0.51 HP/kg (1.95 kg per horsepower). Rider ergonomics and chassis geometry center around a 800 mm (31.5 in) seat height — offering a neutral standover height that accommodates most average-inseam riders without sacrificing cornering clearance, combined with a 1,450 mm (57.1 in) wheelbase engineered for balanced agility and highway composure. The 15-liter (4 US gal) fuel tank supports practical everyday commuting and weekend road stints.
Within MotoLibrary's Ducati archive, this model family spans 5 indexed model years from 2010 to 2014, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.
Specific Output
106.8 HP/L
Power-to-Weight
0.51 HP/kg (1.95 kg/HP)
Power Band Window
6,250–8,250 rpm
Standover Height
800 mm (31.5 in)
Engine
Displacement803.0 ccm (49.00 cubic inches)
Engine TypeV2, four-stroke
Engine DetailsV2, four-stroke
Power85.8 HP (62.6 kW)) @ 8250 RPM
Torque58.0 Nm (5.9 kgf-m or 42.8 ft.lbs) @ 6250 RPM
Compression11.0:1
Bore x Stroke88.0 x 66.0 mm (3.5 x 2.6 inches)
Fuel SystemInjection. Siemens electronic fuel injection, 45mm throttle body
Fuel ControlDesmodromic valve control
CoolingAir
Transmission
Gearbox6-speed
Final DriveChain (final drive)
ClutchAPTC wet multiplate with hydraulic control
Performance
ExhaustLightweight 2-1-2 system with catalytic converter with twin lambda probes
Chassis
Frame TypeTubular steel Trellis frame
Rake24.0°
Front SuspensionShowa 43mm upside-down forks
Front Travel120 mm (4.7 inches)
Rear SuspensionProgressive linkage with preload and rebound Sachs adjustable monoshock
Rear Travel148 mm (5.8 inches)
Wheelbase1450 mm (57.1 inches)
Wheels & Brakes
Front Tyre120/70-ZR17
Rear Tyre180/55-ZR17
Front BrakesDouble disc
Front Brake Ø320 mm (12.6 inches)
Rear BrakesSingle disc
Rear Brake Ø245 mm (9.6 inches)
Dimensions & Weight
Dry Weight167.0 kg (368.2 pounds)
Power/Weight0.5140 HP/kg
Seat Height800 mm (31.5 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Weight
Compare weight carefully because it affects low-speed handling, parking and confidence.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
