Engineered by Benelli for the naked motorcycle segment, the 2020 Benelli BN 302 pairs a 300 cc (18.3 cu in) liquid-cooled twin, four-stroke architecture with road-focused gearing. In factory specification, peak output is rated at 38 HP (27.7 kW) at 11,000 rpm while maximum torque reaches 25.6 Nm (18.9 lb-ft) at 9,750 rpm, transferring power to the rear wheel through a 6-speed gearbox and chain final drive. With a specific output of 126.7 HP per liter and a 1,250 rpm working window between peak torque (9,750 rpm) and peak power (11,000 rpm), the engine character is reflecting a performance-oriented street tune that balances strong mid-range pull with an energetic top-end rush.
On the scales, the BN 302 measures 196 kg (432 lbs) wet (curb), translating to a power-to-weight ratio of 0.19 HP/kg (5.16 kg per horsepower). Rider ergonomics and chassis geometry center around a 795 mm (31.3 in) seat height — offering a neutral standover height that accommodates most average-inseam riders without sacrificing cornering clearance, combined with a 1,410 mm (55.5 in) wheelbase engineered for quick, flickable steering geometry. The 16-liter (4.2 US gal) fuel tank paired with a rated consumption of 4.3 L/100 km provides an estimated theoretical range of roughly 372 km (231 miles) between fill-ups.
Within MotoLibrary's Benelli archive, this model family spans 7 indexed model years from 2014 to 2020, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.
Specific Output
126.7 HP/L
Power-to-Weight
0.19 HP/kg (5.16 kg/HP)
Power Band Window
9,750–11,000 rpm
Theoretical Range
~372 km (231 mi)
Engine
Displacement300.0 ccm (18.31 cubic inches)
Engine TypeTwin, four-stroke
Engine DetailsHorizontal cylinder
Power38.0 HP (27.7 kW)) @ 11000 RPM
Torque25.6 Nm (2.6 kgf-m or 18.9 ft.lbs) @ 9750 RPM
Compression12.0:1
Bore x Stroke65.0 x 45.2 mm (2.6 x 1.8 inches)
Valves/Cylinder4
Fuel SystemInjection. Two throttle bodies ø37 mm
Fuel ControlDouble Overhead Cams/Twin Cam (DOHC)
IgnitionDelphi MT05
LubricationWet sump
CoolingLiquid
Transmission
Gearbox6-speed
Final DriveChain (final drive)
ClutchWet clutch
Performance
Fuel Consumption4.30 litres/100 km (23.3 km/l or 54.70 mpg)
Greenhouse Gases99.8 CO2 g/km. (CO2 - Carbon dioxide emission)
Emission DetailsEuro 3. Catalytic converter and oxygen sensor.
Chassis
Frame TypeSteel trestle in steel tubes
Front Suspension41mm Upside down forks
Front Travel135 mm (5.3 inches)
Rear SuspensionRear swing arm with lateral shock absorber with extension hydraulic brake and spring preload adjustment
Rear Travel46 mm (1.8 inches)
Wheelbase1410 mm (55.5 inches)
Ground Clearance175 mm (6.9 inches)
Wheels & Brakes
Front Tyre120/70-ZR17
Rear Tyre160/60-ZR17
Front BrakesDouble disc. 4 pistons caliper. ABS.
Front Brake Ø260 mm (10.2 inches)
Rear BrakesSingle disc. 2 pistons caliper. ABS.
Rear Brake Ø240 mm (9.4 inches)
WheelsAluminum alloy
Dimensions & Weight
Dry Weight185.0 kg (407.9 pounds)
Weight incl.196.0 kg (432.1 pounds)
Power/Weight0.2054 HP/kg
Seat Height795 mm (31.3 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Weight
Compare weight carefully because it affects low-speed handling, parking and confidence.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
