Built around Enfield's classic motorcycle platform, the 2010 Enfield Classic 500 utilizes a 499 cc (30.5 cu in) air-cooled single cylinder, four-stroke layout. In factory specification, peak output is rated at 27.2 HP (19.9 kW) at 5,250 rpm while maximum torque reaches 41.3 Nm (30.5 lb-ft) at 4,000 rpm, transferring power to the rear wheel through a 5-speed gearbox and chain final drive. With a specific output of 54.5 HP per liter and a 1,250 rpm working window between peak torque (4,000 rpm) and peak power (5,250 rpm), the engine character is prioritizing low-RPM tractability, mechanical longevity and relaxed throttle response over peak redline numbers.
On the scales, the Classic 500 measures 182 kg (401 lbs) dry, translating to a power-to-weight ratio of 0.15 HP/kg (6.69 kg per horsepower). Rider ergonomics and chassis geometry center around a 800 mm (31.5 in) seat height — offering a neutral standover height that accommodates most average-inseam riders without sacrificing cornering clearance, combined with a 1,370 mm (53.9 in) wheelbase engineered for quick, flickable steering geometry. The 13.5-liter (3.6 US gal) fuel tank supports practical everyday commuting and weekend road stints.
Within MotoLibrary's Enfield archive, this model family spans 6 indexed model years from 2010 to 2019, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.
Specific Output
54.5 HP/L
Power-to-Weight
0.15 HP/kg (6.69 kg/HP)
Power Band Window
4,000–5,250 rpm
Standover Height
800 mm (31.5 in)
Engine
Displacement499.0 ccm (30.45 cubic inches)
Engine TypeSingle cylinder, four-stroke
Engine DetailsSingle cylinder, four-stroke
Power27.2 HP (19.9 kW)) @ 5250 RPM
Torque41.3 Nm (4.2 kgf-m or 30.5 ft.lbs) @ 4000 RPM
Compression8.5:1
Bore x Stroke84.0 x 90.0 mm (3.3 x 3.5 inches)
Fuel SystemInjection
Fuel ControlOverhead Valves (OHV)
IgnitionElectronic Ignition
LubricationDry sump
CoolingAir
Transmission
Gearbox5-speed
Final DriveChain (final drive)
ClutchMulitiplate in oil
Chassis
Front SuspensionTelescopic, Hydraulic damping
Front Travel130 mm (5.1 inches)
Rear SuspensionSwing arm with adjustable Gas filled shock absorber
Rear Travel80 mm (3.1 inches)
Wheelbase1370 mm (53.9 inches)
Ground Clearance140 mm (5.5 inches)
Wheels & Brakes
Front BrakesSingle disc
Rear BrakesExpanding brake (drum brake)
Dimensions & Weight
Dry Weight182.0 kg (401.2 pounds)
Power/Weight0.1495 HP/kg
Seat Height800 mm (31.5 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Weight
Compare weight carefully because it affects low-speed handling, parking and confidence.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
