2013 Vespa S 150 ie. Technical Analysis & Specification Breakdown
At the heart of the 2013 Vespa S 150 ie. scooter motorcycle, Vespa features a 150 cc (9.2 cu in) air-cooled single cylinder, four-stroke configuration. In factory specification, peak output is rated at 11.7 HP (8.5 kW) at 7,750 rpm while maximum torque reaches 11.5 Nm (8.5 lb-ft) at 8,400 rpm, transferring power to the rear wheel through a automatic gearbox and belt final drive. With a specific output of 78 HP per liter, the engine character is indicating a tractable, stress-free state of tune focused on everyday usability and broad torque delivery.
On the scales, the S 150 ie. measures 110 kg (243 lbs) dry, translating to a power-to-weight ratio of 0.11 HP/kg (9.4 kg per horsepower). Rider ergonomics and chassis geometry center around a 785 mm (30.9 in) seat height — offering a neutral standover height that accommodates most average-inseam riders without sacrificing cornering clearance, combined with a 1,278 mm (50.3 in) wheelbase engineered for quick, flickable steering geometry. The 8.71-liter (2.3 US gal) fuel tank supports practical everyday commuting and weekend road stints, while factory top speed is listed at 95 km/h (59 mph).
Within MotoLibrary's Vespa archive, this model family spans 2 indexed model years from 2011 to 2013, allowing buyers to track year-over-year changes in emissions tuning, weight and equipment.
Specific Output
78 HP/L
Power-to-Weight
0.11 HP/kg (9.4 kg/HP)
Standover Height
785 mm (30.9 in)
Engine
Displacement150.0 ccm (9.15 cubic inches)
Engine TypeSingle cylinder, four-stroke
Engine DetailsLeader engine
Power11.7 HP (8.5 kW)) @ 7750 RPM
Torque11.5 Nm (1.2 kgf-m or 8.5 ft.lbs) @ 8400 RPM
Bore x Stroke62.8 x 48.6 mm (2.5 x 1.9 inches)
Fuel SystemInjection
LubricationWet sump, chain-driven lobe pump
CoolingAir
Transmission
GearboxAutomatic
Final DriveBelt (final drive)
ClutchAutomatic dry centrifugal clutch with vibration dampers
DrivelineCVT transformer with torque slave
Performance
Top Speed95.0 km/h (59.0 mph)
Emission DetailsEPA and CARB
Chassis
Frame TypeLoad-bearing steel chassis
Front SuspensionSingle sided trailing link with hydraulic shock absorber
Rear SuspensionHydraulic shock absorber
Wheelbase1278 mm (50.3 inches)
Wheels & Brakes
Front Tyre110/70-11
Rear Tyre120/70-10
Front BrakesSingle disc
Front Brake Ø200 mm (7.9 inches)
Rear BrakesExpanding brake (drum brake)
Rear Brake Ø110 mm (4.3 inches)
Dimensions & Weight
Dry Weight110.0 kg (242.5 pounds)
Power/Weight0.1060 HP/kg
Seat Height785 mm (30.9 inches) If adjustable, lowest setting.
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Power
Compare engine output with similar motorcycles if acceleration, highway use or two-up riding matters.
Torque
Torque is useful for judging real-world pull, especially for touring, commuting and loaded riding.
Seat Height
Check the seat height against your inseam and riding posture before choosing a motorcycle.
Weight
Compare weight carefully because it affects low-speed handling, parking and confidence.
Fuel Capacity
Fuel capacity helps estimate touring range and how often you may need to stop.
Brakes
Brake setup is worth comparing if you ride in traffic, mountains or with a passenger.
Suspension
Suspension details can matter for comfort, road feel and long-distance riding.
Transmission
Transmission and final drive affect maintenance, smoothness and everyday usability.
