Lifan KP250
Lifan KP250 Performance & Handling Ratings
Lifan KP250 Tire Size, Oil & Service Capacities
Model id:LF250-3R Chinese brand
2020 Lifan Kp250 2020 Lifan KP250 Pros, Cons, Recalls & Verdict
- Liquid-cooled 249cc DOHC single-cylinder engine generates a healthy 20 horsepower for confident highway merging
- Modern naked streetfighter styling highlighted by sharp angular tank shrouds and full LED illumination
- Equipped with standard dual-channel ABS for enhanced safety during wet and panic braking scenarios
- Inverted front telescopic forks contribute to sharp, predictable front-end feedback in tight turns
- Lightweight curb weight and low seat height make parking and slow-speed maneuvering effortless
- Vibrations become perceptible through the footpegs and handlebars past 7,500 rpm
- Pillion passenger accommodations are relatively sparse with a small and firm rear pad
- OEM tires offer limited traction on damp road surfaces and slick tarmac
- Gear lever throw is relatively long, occasionally causing false neutrals between second and third gears
- Exhaust note is fairly muted and utilitarian compared to European quarter-liter rivals
The 2020 Lifan KP250 serves as Lifan's contemporary answer to the 250cc urban naked class, combining aggressive styling with practical daily manners. Its DOHC liquid-cooled single provides a lively power curve backed by a six-speed transmission that handles commuter duty and highway stretches with equal composure. Although minor engine vibrations at high revs and basic OEM rubber remind you of its price tag, standard dual-channel ABS and inverted forks provide excellent baseline hardware. It is well suited for budget-conscious novices looking to graduate from entry 125-150cc motorcycles to a genuine highway-capable roadster.
No official safety recalls reported for this model year.
2020 Lifan Kp250 2020 Lifan KP250 Technical Analysis, Chassis Review & Ownership Overview
At the heart of the 2020 Lifan Kp250 2020 Lifan KP250 motorcycle, Lifan Kp250 2020 relies on a 249 cc (15.2 cu in) liquid-cooled single cylinder, four-stroke powerplant. In factory specification, peak output is rated at 19.4 HP (14.5 kW) at 9,000 rpm while maximum torque reaches 22 Nm (16.2 lb-ft) at 7,000 rpm, transferring power to the rear wheel through a 6-speed transmission, a wet multiplate clutch. Internal cylinder geometry specifies a bore and stroke of 77.0 x 53.6 mm (3.0 x 2.1 inches), an 11.5:1 compression ratio, 2 valves per cylinder. With a specific output of 77.9 HP per liter and a 2,000 rpm working window between peak torque (7,000 rpm) and peak power (9,000 rpm), the engine character indicates a tractable, stress-free state of tune focused on everyday usability and broad torque delivery across the rev range.
On the scales, the Lifan KP250 measures 154 kg (340 lbs) dry, translating to a power-to-weight ratio of 0.13 HP/kg (7.94 kg per horsepower). Rider ergonomics and dimensional geometry center around a 790 mm (31.1 in) seat height — offering a neutral standover height that accommodates most average-inseam riders (170–182 cm / 5'7"–6'0") without sacrificing cornering clearance and a 1,405 mm (55.3 in) wheelbase engineered for quick, flickable turn-in geometry. The 14-liter (3.7 US gal) fuel tank supports practical everyday commuting and weekend road stints, while factory top speed is rated at 130 km/h (81 mph).
Chassis suspension hardware on the 2020 Lifan Kp250 2020 Lifan KP250 is configured for predictable road feedback with front suspension handled by Telescopic fork and rear damping managed via Swingarm with monoshock. Braking performance is delivered by single disc up front paired with single disc at the rear. Factory rolling stock mounts a 110/70-17 front tire and a 140/70-17 rear tire, sizing the contact patch for predictable turn-in grip and replacement tire availability.
With 14.5 kW of factory power, the Lifan KP250 sits within the 35 kW (47.5 HP) European A2 intermediate license ceiling in standard trim. Routine workshop maintenance calls for recommended SAE 10W-40 4T (API SL/SN / JASO MA2) engine oil (1.00 litres (1.06 US quarts)), NGK CR8E / CPR8EA-9 spark plugs, cold tire pressures of 1.8 bar (26 psi) front / 2.0 bar (29 psi) rear. Buyers cross-shopping the 2020 Lifan Kp250 2020 Lifan KP250 in the Unspecified category segment most frequently benchmark its horsepower, seat height, and curb weight against the Italmoto Nevia E 2022 2022 Italmoto Nevia E (2022), Road Hopper Type 2i (2023), Sym Jet 4 50 (2019).
🚀 Logical Next Step-Up Upgrades
📏 Lower-Seat Unspecified category Alternatives
Before You Compare This Bike
Use this page to compare this motorcycle by its real specifications, not only by model name. Focus on the details that affect fit, comfort, handling, range and ownership.
Who Is This Bike For?
Lifan KP250 Seat Height & Rider Height Fit
Lifan KP250 A1, A2 & LAMS License Compatibility
Directly compliant with the ≤35 kW (47 HP) and ≤0.20 kW/kg A2 license limit without restriction kits.
Lifan KP250 Engine Stroke, RPM & Steering Geometry
vm = 2 × Stroke × RPM / 60) measures piston travel velocity at peak power. Values under 18.5 m/s indicate low inertial stress on connecting rods and rings; values above 21.5 m/s approach Formula 1 / MotoGP velocities. Lifan KP250 Sprocket Ratio, RPM & Top Speed
Lifan KP250 Tire Pressure (PSI / Bar) & Suspension Sag
2020 Lifan Kp250 2020 Lifan KP250 Summary Table
Writing a review, forum post, or blog article on the 2020 Lifan Kp250 2020 Lifan KP250? Copy a Markdown table or embeddable HTML spec card:
### 2020 Lifan Kp250 2020 Lifan KP250 — Key Specs & Telemetry | Parameter | Specification | | :--- | :--- | | **Category** | Unspecified category | | **Displacement** | 249.0 ccm (15.19 cubic inches) | | **Power Output** | 19.4 HP (14.5 kW) @ 9000 RPM (0.089 kW/kg) | | **Torque** | 22.0 Nm (2.2 kgf-m or 16.2 ft.lbs) @ 7000 RPM | | **Seat Height** | 790 mm (31.1 inches) If adjustable, lowest setting. | | **Weight (Dry / Wet)** | 154.0 kg (339.5 pounds) / 163.2 kg | | **Mean Piston Speed** | 16.1 m/s @ 9000 RPM | | **EU A2 License Status** | EU / UK A2 Compliant (Native) | | **Source & Full Telemetry** | https://motolibrary.com/bikes/lifan-kp250-2020/lifan-kp250/2020 |
<div style="font-family:system-ui,-apple-system,sans-serif;border:1px solid #e2dfd8;border-radius:12px;padding:14px 16px;max-width:560px;background:#ffffff;color:#1a1a1a"><div style="font-weight:700;font-size:16px;margin-bottom:8px">2020 Lifan Kp250 2020 Lifan KP250 — Technical Specs & Recall Summary</div><table style="width:100%;border-collapse:collapse;font-size:13px"><tr><td style="padding:5px 0;border-bottom:1px solid #eee;color:#666">Engine / Power</td><td style="padding:5px 0;border-bottom:1px solid #eee;font-weight:600;text-align:right">249.0 ccm (15.19 cubic inches) · 19.4 HP (14.5 kW) @ 9000 RPM</td></tr><tr><td style="padding:5px 0;border-bottom:1px solid #eee;color:#666">Seat Height</td><td style="padding:5px 0;border-bottom:1px solid #eee;font-weight:600;text-align:right">790 mm (31.1 inches) If adjustable, lowest setting.</td></tr><tr><td style="padding:5px 0;border-bottom:1px solid #eee;color:#666">Weight (Dry / Wet)</td><td style="padding:5px 0;border-bottom:1px solid #eee;font-weight:600;text-align:right">154.0 kg (339.5 pounds) / 163.2 kg</td></tr><tr><td style="padding:5px 0;border-bottom:1px solid #eee;color:#666">License / Recall Audit</td><td style="padding:5px 0;border-bottom:1px solid #eee;font-weight:600;text-align:right">EU / UK A2 Compliant (Native) · 0 official safety recalls recorded</td></tr></table><div style="margin-top:8px;font-size:12px;color:#666">Data source: <a href="https://motolibrary.com/bikes/lifan-kp250-2020/lifan-kp250/2020" style="color:#bf3b00;font-weight:600;text-decoration:none">2020 Lifan Kp250 2020 Lifan KP250 Specs, Review & Recalls — MotoLibrary</a></div></div>
Lifan KP250 Annual Fuel, Maintenance & Ownership Cost
* Estimates only. Actual costs vary by country, riding habits, insurance provider and maintenance schedule.
2020 Lifan Kp250 2020 Lifan KP250 Frequently Asked Questions
Does the 2020 Lifan Kp250 2020 Lifan KP250 have any official safety recalls?
No official safety recalls reported for this model year.
What is the seat height and weight of the 2020 Lifan Kp250 2020 Lifan KP250?
The 2020 Lifan Kp250 2020 Lifan KP250 has a seat height of 790 mm (31.1 inches) If adjustable, lowest setting., a dry weight of 154.0 kg (339.5 pounds), and a wet/curb weight of 163.2 kg (estimated).
Is the 2020 Lifan Kp250 2020 Lifan KP250 EU A2 or LAMS license legal?
License classification: EU / UK A2 Compliant (Native). Directly compliant with the ≤35 kW (47 HP) and ≤0.20 kW/kg A2 license limit without restriction kits.